催化湿式氧化技术处理苯并三氮唑生产废水的研究

    Study on Adopting Catalytic Wet-type Oxidation Technology to Dispose Benzotriazole Production Waste Water

    • 摘要: 采用催化湿式氧化技术处理在生产苯并三氮唑(BTA)过程中产生的高浓度有机废水。实验证明:制备的复合负载型催化剂CuO-Co3O4-MnO2/ZrO2-CeO2在处理该废水时具有较好的催化活性。通过对催化剂投入增加、反应温度、氧气分压和废水pH值等工艺条件的考察,得出的最佳工艺条件为:催化剂投加量为10g/L,反应温度为220℃,氧气分压为2.5MPa,废水初始pH值为10.5,在此条件下反应120min,CODcr去除率达到98.2%。

       

      Abstract: Adopting catalytic wet-type Oxidation to dispose the high concentrated organic waste water produced during the production process of benzotriazole. The experiment demonstrates that the preparation of composite supported catalysts CuO-Co3O4-MnO2/ZrO2-CeO2 have better catalytic activity when disposing the waste water. Through the study of increasing the catalyst investment, reaction temperature, oxygen tension and the PH value of wastewater and other technological conditions, we obtain the optimum technological condition: When catalyst dosing quantity is 10 g/L, reaction temperature is 220℃, oxygen tension is 2.5MPa, the initial PH value of wastewater is 10.5, to react for 120 min under these conditions, CODcr removal rate can reach to 98.2%.

       

    /

    返回文章
    返回